Flash memory
Introduction
When you save files, for example, pictures, songs and video files, you have a number of different storage options. You might save them onto a CD or DVD. You might save them onto a portable hard drive. Or you might save them onto a flash memory device.
Examples of flash memory
Examples of flash memory devices include:
-
- SM (smart media) memory cards
- micro SD memory cards
- memory cards for video games
- pen drives (memory sticks)
- ROM chips in computers
Solid state
The defining characteristic of these types of memory devices is that there are no moving parts. Everything is electronically saved. For this reason, flash memory devices are also known as solid state devices. An additional benefit of this is that solid state devices require very little power to run them (because there are no moving parts that need energy to move them). They can therefore usually get the tiny power they need from whatever they are plugged into.
If you have ever taken a hard disk apart or read about how they work, you will know that mechanical parts are used inside the hard drive, to read and write data to disks. In optical devices that read to and write from CDs and DVDs, there are also moving parts, which take up energy to make them move. The main problem with moving parts is that over time, they wear out and fail and they also don't like to be bashed about too much. Flash memory devices on the other hand have no moving parts because they use solid state technology and so there are no parts to wear out. They are also not quite as easily damaged by movement and being dropped (although you do still have to look after them). You can also damage them by reoving them from a computer, for example, before removing the power from them. This is why you should always use the removal utility program on your computer if there is one. On Windows 7, this is found in the bottom right hand corner.